How to use the air filter correctly

Release time:

Dec 06,2023

The task of the air filter is to filter the suspended particles in the air entering the cylinder to reduce the wear of the cylinder, piston and piston ring. Among the three media required for the engine to work, the air is large and comes from the atmosphere. If the air filter cannot effectively filter the suspended particles in the air, the lighter ones will accelerate the wear of the cylinder, piston and piston ring, and the heavier ones will cause the cylinder to strain and shorten the service life of the engine.

1. misunderstanding

1. Don't ask the quality when buying
Because a small number of maintenance personnel did not realize the importance of the air filter, only for cheap, not for quality, the result of the engine installed soon appeared abnormal. Especially in the current market more fake and shoddy products, to shop around, careful choice, always adhere to the principle of quality first.

2. Disassemble at will during use
The engine must use a scientifically based air filter.
However, some drivers remove the air filter at will and let the engine directly inhale unfiltered air to work. The truck air filter disassembly experiment shows that after the air filter is disassembled, the wear of the engine cylinder will increase by 8 times, the wear of the piston will increase by 3 times, and the wear of the piston ring will increase by 9 times.

3. Maintenance and replacement do not proceed from reality
In the air cleaner instruction manual, although mileage or working hours are specified as maintenance or replacement data. But in fact, the maintenance and replacement cycle of the air filter is also related to environmental factors.
For cars that often drive in dusty environments, the maintenance or replacement cycle of the air filter should be shortened; for dusty cars, the maintenance or replacement cycle of the air filter is sufficient. Prolonged appropriately.
In actual work, many drivers and maintenance personnel act mechanically according to the regulations and do not have the flexibility to grasp different factors such as the environment. They insist on waiting for the mileage to reach the standard and the engine working condition to be obviously abnormal before carrying out maintenance. It should be noted that if repairs are carried out at this time, not only the losses that have been caused cannot be recovered, but also greater harm will be caused. What's more, individual drivers do not even know that the air filter will fail, as long as the appearance is not damaged, continue to use.

Key words:

Identification method of air filter

Misunderstanding and Identification Method of Air Filter

Identification method of air filter

Misunderstanding and Identification Method of Air Filter

News